Payne® - 14 SEER2 Air Conditioner Condensing Unit R410A

FEATURES / BENEFITS

SEER2:

Higher Energy Efficiency - SEER (old system pre 2024) was rated at 0.1 static pressure and any house in the real world isn't ever near that they are usually 5x that pressure! This means SEER2 rated at 0.5 static pressure is far more efficient than a regular SEER (14 SEER2 would be equivalent of a 16 SEER model!) condenser and they are now the only option allowed in Canada once all 13SEER models are sold as they can no longer be made.

AVAILABLE SIZES:
Nominal sizes are available from 018 (1.5 ton) through 060 (5 ton) to meet the needs of residential and light commercial applications.

CERTIFICATION:
All models are listed with UL, (U.S. and Canada), AHRI, and CEC.

ELECTRICAL RANGE:
Units offered in single phase 208/230v are 018-060 (special order), and three phase 208/230v in 036, 048 and 060.

FAN MOTOR:
The totally enclosed fan motor provides greater reliability under adverse conditions and dependable performance for many years. The permanent split capacitor type motor was designed for optimum efficiency. The motor was then qualified under extreme conditions to help ensure a long, reliable life.

CABINET:
A weather-protective cabinet of prepainted steel is protected underneath by a galvanized coating and treated with a layer of zinc phosphate for a finish that will last for many years. All screws on the cabinet exterior are coated for a long-lasting, rust-resistant, quality appearance.

UNIT DESIGN:
The copper tube, enhanced sine wave, and aluminum fin coil is designed for optimum heat transfer. Vertical air discharge carries sound and hot condenser air up and away from adjacent patio areas and foliage. The base pan is designed for easy removal of water, dirt, and leaves.

COMPRESSOR:
Each compressor is protected with internal temperature and current-sensitive overloads. An internal pressure relief valve provides high-pressure protection to the refrigerant system. For improved serviceability, all models are equipped with a compressor terminal plug. R410A Refrigerant.

SERVICE VALVES:
Both service valves are brass, front seating type with sweat connections. Valves are externally located so refrigerant tube connections can be made quickly and easily. Each valve has a service port for ease of checking operating refrigerant pressures.

SERVICEABILITY:
One access panel provides access to electrical controls. Removal of the top gives access to the fan motor, compressor, and condenser coil.